Flow Enterprise Server 2024.2.1 system requirements

These system requirements apply to Flow Enterprise Server version 2024.2.1

System requirements

Flow uses Kubernetes for orchestration. The Flow stack must run in its own instance.

Cluster setup

Flow strongly recommends using three or more nodes to ensure proper disk quorum (external site, opens in new tab) and system stability. Having three or more nodes provides protection from node failure, disk failure, and volume corruption.

If you have fewer than three nodes, Flow shows a warning message on the KOTS admin console, but you can still proceed.

The minimum requirements for each node are listed below:

Computing resource requirements

• CPU: Minimum of 16 CPU cores per node. 32 cores recommended.
• Memory: Minimum of 32 GB per node. 64 GB recommended.

Storage requirements

Unless otherwise noted, the storage requirement applies to all primary and worker nodes in the cluster.

• Installation cache (/tmp): 15 GB
  • This is only used during installation.
• Raw block storage: 50 GB
  • This is required for both new installations and upgrades.
• Infrastructure Directories: Allocate ~160 GB for infrastructure required by Flow. This includes a 30% buffer for future growth. Specific directories are subject to change, but are currently:
  • Containerd (/var/lib/containerd): ~60 GB
  • Container logs (/var/log/pods): ~10 GB
  • Kubernetes (/var/lib/kubelet): ~30 GB
  • Rook (/var/lib/rook): ~10 GB
  • Add-on packages (/var/lib/kurl): ~10 GB
• Application directories
  • Replicated (/opt/replicated): 5 GB
  • Application directory (default /opt/flow)
    Note: The application directory is configurable via settings. [app_directory] is used as a placeholder.
    • Repository cache (default [app_directory]/repository_cache):
      • Worker node(s): 100 GB or the sum of the total sizes of your code repositories, multiplied by 2.5. Choose whichever is greater.
    • Application logs (default [app_directory]/logs): 10 GB
    • Embedded database (optional; default [app_directory]/database): 2 GB

Additional storage requirement details

Solid state drive (SSD) type storage with high IOPS for the volumes used for Flow Enterprise Server is recommended. Having separate disks for volumes like /var/lib/containerd and /var/lib/kubelet increases performance during report generation and data processing.

back to top

Operating system

Flow Enterprise Server can be run on compatible operating systems, including:

• Ubuntu 18.04, 20.04
• RHEL 8.1, 8.2, 8.3, 8.4, 8.5, 8.6, 8.7
  • For RHEL-based distributions, the file system and storage drive must support the overlay2 storage driver for Containerd services.

Operating systems with hardened kernel images containing PAM (privilege access manager agents) or SELINUX policies may interfere with Flow installation and normal operation of the software stack. Those agents and policies may need to be disabled for you to install Flow or for it to function normally. Support for such hardened operating systems is provided on a "best effort" basis.

back to top

Database requirements

Flow Enterprise Server requires a PostgreSQL database server with solid state drives (SSDs). The size of your database server will vary greatly depending on the size of your repositories, the amount of activity on your repositories, the number of active contributors you have, and the total number of concurrent users on Flow reports.

We recommend a minimum of:

• PostgreSQL version 12 with minor version 12.1 or greater

• 8 CPU cores or more
• 32 GB of RAM or more
• Disk space of approximately 25% of the space calculated for the Repository cache (default [app_directory]/repository_cache), as defined above

Installations with hundreds of thousands of repositories have required very large servers with 64 cores and 512 GB RAM.

Database performance greatly impacts the performance of the overall Flow application. Proactive monitoring of the CPU, memory, and IOPS health are key. Work with your Database team to monitor and tune your database.

back to top

Network requirements

You can implement Flow Enterprise Server without access to the internet. However, we recommend an active internet connection for access to software packages during the installation and for future updates. You can schedule this to coincide with your regular maintenance. If you require the system to have no external internet access, you can implement and maintain an airgapped installation.

IPV6 must be enabled. This ensures compatibility with the underlying network virtualization layers of the Flow product stack.

For data analysis, your Flow Enterprise system must have access to your Git repositories and ticketing systems.

The following ports should be allowed to these instances:

• HTTP/80 and HTTPS/443: These should be the standard ports for your Git repository and ticket system server data for both Git data and API information.
• SSH/22 (usually): Most Git vendors allow for SSH download of repositories they serve.
• TCP/6443 for KOTS admin API
• TCP/6783 and UDP/6783-6784 for the Weave application service

For user access to the system, open the following ports to internal users:

• HTTP/80: This must be open for internal health-check pings.
• HTTPS/443: This must be open for users to use the interface.
• HTTPS/8800: This port is used to reach the KOTS admin interface with a web browser. It does not have to be open to general users, but must be available to system administrators.
• SSH/22: System administrators will need access to SSH on the server instance running Flow Enterprise for occasional updates and maintenance.

Additionally, the following ports are used by the application:

• 5432: between the Flow server and the Postgres database
• 25, 587, 465: between the Flow server and email relay
• 53: TCP/UDP: the application must be able to resolve itself against a DNS server

• All ports from the Flow server to itself (usually implicit)

Flow uses IP address range 10.96.0.0/22 for services and 10.32.0.0/20 for pods.  These IP ranges are for Kubernetes internal use only, and typically don’t need to be changed. However, IP conflicts can arise when the app needs to access services external to the application that have conflicting IP addresses (Configured integrations). To avoid IP conflict, you can configure both ranges, but only during installation.

If you run Kubernetes in an environment with strict network boundaries, you may need to allow the following ports:

Primary nodes (inbound):

• TCP 6443: Kubernetes API server
• TCP 2379-2380: ETCD server client API
• TCP 10250: kubelet API
• TCP 6783: Weave Net control
• UDP 6783-6784: Weave Net data
• TCP 9090: Rook CSI RBD Plugin

Secondary nodes (inbound):

• TCP 10250: kubelet API primary
• TCP 6783: Weave Net control
• UDP 6783-6784: Weave Net data
• TCP 9090: Rook CSI RBD Plugin

Between nodes (all TCP):

• 2381: etcd health and metrics server
• 6781: Weave network policy controller metrics server
• 6782: Weave metrics server
• 10248: kubelet health server
• 10249: kube-proxy metrics server
• 9100: prometheus node-exporter metrics server
• 10257: kube-controller-manager health server
• 10259: kube-scheduler health server

Additional information and limitations

• The KOTS admin console only supports Password Authentication Mode.
• It is possible to install Flow behind an AWS load balancer and a proper security group.

Airgap infrastructure diagram